VigorAP 910C

In Stock
1 week

Calculate Shipping

802.11ac wireless access point with ceiling mount housing and 1 x Gigabit PoE PD port

The VigorAP 910C is a Wireless Access Point

VigorAP 910C is an 802.11ac wireless access point with a PoE PD port and ceiling mount housing. It supports expanded wireless features such as multiple SSID, hidden SSID, Wi-Fi multimedia, wireless isolation, an internal radius server and universal repeater mode.

With the optimized antennas built-in, DrayTek VigorAP 910C ceiling-mount wireless access point is ideal for hospitalities, small offices and small campus. The VigorAP 910C is IEEE 802.11ac compliant and supports multiple operating modes, such as wireless access point, wireless client, wireless distribution system (WDS) and universal repeater. The VigorAP 910C makes high density with quality-performance be feasible for users as it is going to be implemented with DrayTek central wireless management (AP Management) supports configuration, firmware upgrade, status, monitoring, and load-balancing.

  • IEEE802.11ac wireless Access Point with PoE PD port and ceiling mount housing
  • Supports multiple SSID with bandwidth management per SSID
  • Equipped with advanced central wireless management (AP Management)
  • Up to 866Mbps Wi-Fi throughput
  • 2 years back to base warranty

The benefits of central wireless management ( AP Management)

The VigorAP 910C can operate in standalone mode for your office network or a classroom; connected to your LAN and offering you with wireless access. If your network requires several VigorAP 910C units, to centrally manage and monitor them individually as a group will be expected. DrayTek central wireless management (AP Management) lets control, efficiency, monitoring and security of your company-wide wireless access easier be managed. Inside the web user interface, we call “central wireless management” as AP Management which supports mobility, client monitoring/reporting and load-balancing to multiple APs. For central wireless management, you will need a Vigor2860 or Vigor2925 series router; there is no per-node licensing or subscription required. With the unified user interface of Vigor2860 Combo WAN series and Vigor2925 Triple WAN series, the multiple deployment of VigorAP 910C can be clear at the first sight. For multiple wireless clients, to apply the AP Load Balancing to the multiple APs will manage wireless traffic with smooth flow and enhanced efficiency.

PoE for easy installation

The Power of Ethernet (PoE) on VigorAP 910C relieves the installation of power plug. The massive deployment of VigorAP 910C for hospitalities and school environment will be much easier.

WMM for Wi-Fi application prioritization

DrayTek implements intelligent wireless prioritization technology on VigorAP 810 for best utilization of wireless coverage. VigorAP 910C supports Wi-Fi Multi Media standard (WMM). It is a standard created to define Quality of Service (QoS) in Wi-Fi networks. It is a precursor to the upcoming IEEE 802.11e WLAN QoS draft standard, which is meant to improve audio, video and voice applications transmitted over Wi-Fi. WMM adds prioritized capabilities to Wi-Fi networks and optimizes their performance when multiple concurring applications, each with different latency and throughput requirements, compete for network resources.

Comprehensive WLAN security control

You can obtain the MAC addresses of each wireless client from its configuration utility or operating system. You then enter these addresses into a configuration page of VigorAP 910C. When MAC address filtering is activated, VigorAP 910C performs additional check for wireless clients to prevent network breaking. Clients within the authenticated list will be able to join with the WLAN. Those who are not on the list will be denied while VigorAP 910C receives their request to join the WLAN.

With industry level security standards for wireless user authentication and data encryption, 802.11i (WPA2) offers strengthened and interoperable wireless networking security. The activation of 802.1x RADIUS (Remote Authentication Dial-in User Service) allows you centrally manage and store user names and passwords either within the VigorAP 910C setup itself (thus not requiring any external server) on an external radius server which can allow continuous, time-limited, or temporary access to your clients as required. You can ensure that only legitimate clients can be associated with corporate RADIUS servers.

WDS for unlimited coverage extendibility

he VigorAP 910C can extend over large areas (alike shopping mall) by its “WDS” (wireless distribution system). WDS takes care of the establishment of WLAN network with “point-to-point” and “point-to-multipoint” bridging and repeater modes. The repeater mode provides extend wireless access to additional clients where there is a relay AP repeats signal from a base AP to distant clients. The bridge-to-bridge mode allows two wired networks to be connected across some distance.

TR-069-supported VigorAP900 can work with TR-069 VigorACS SI Central Management

The VigorAP 900 is TR-069 base. Hence, you can host VigorACS SI Central Management to manage several VigorAP 900 which were deployed remotely.

  VigorAP 710 VigorAP 800 VigorAP 810 VigorAP 900
Dual-LAN No Yes Yes Yes
LAN Ports 1 (FE) 4+1 (FE) 4+1 (FE) 4+1 (GbE)
PoE-PD Port No Yes Yes Yes
WLAN Disable Button Yes Yes Yes Yes
USB Printer Port No Yes Yes Yes
Wireless VLAN Yes Yes Yes Yes
Dual-Band No Yes (with N65) No Yes (Concurrent)
AP Management No Auto Provisioning only AP Load Balance AP Load Balance


Wireless AP

  • IEEE802.11a/b/g/n Compliant
  • Mode:
    • 802.11b/g/n 2.4G Band:
      • AP Mode
      • AP Bridge Point to Point
      • AP Bridge Point to Multipoint
      • AP Bridge WDS (Wireless Distribution System)
      • Universal Repeater
    • 802.11a/n 5G Band:
      • AP Mode*
      • Universal Repeater*
  • Wireless Client List
  • 64/128-bit WEP/WPA/WPA2
  • Multiple/Hidden SSID
  • WPS
  • WMM
  • MAC Address Control
  • Wireless Isolation
  • Internal Radius Server
  • MAC Clone
  • 802.1x Authentication
    • Internal RADIUS Server Support PEAP
    • RADIUS Proxy Support TLS & PEAP
  • DHCP Server & Client
  • Limited Wireless Clients (Up to 64 Clients)

Network Management

  • Web-based User Interface (HTTP/HTTPS*)
  • CLI (Command Line Interface, Telnet)
  • Configuration Backup/Restore
  • Firmware Upgrade via HTTP/TR-069
  • Syslog
  • SNMP V2/V2c/V3*
  • TR069 (Compliant with VigorACS SI)
  • AP Management (with Vigor Series Routers)

Hardware Interface

  • 1 x 10/100/1000M Base-T LAN Switch, RJ-45 with PoE
  • 1 x Factory Reset Button
  • 1 x Power ON / OFF Button

* Firmware Upgradeable

  VigorAP 710 VigorAP 800 VigorAP 810 VigorAP 900
Dual-LAN No Yes Yes Yes
LAN Ports 1 (FE) 4+1 (FE) 4+1 (FE) 4+1 (GbE)
PoE-PD Port No Yes Yes Yes
WLAN Disable Button Yes Yes Yes Yes
USB Printer Port No Yes Yes Yes
Wireless VLAN Yes Yes Yes Yes
Dual-Band No Yes (with N65) No Yes (Concurrent)
AP Management No Auto Provisioning only AP Load Balance AP Load Balance
Hardware Specifications
Temperature Operation : 0° C ~ 45° C
Storage : -25° C ~ 70° C
Humidity 10% ~ 90 % (Non-codensing)
Power Consumption 10 Watt MAX
Dimension 107 x 167 x 45 ( W x H x D ) mm
Voltage of 802.3af PoE 44v~57v
Adapter DC12V@1A
Brand DrayTek
Shipping Weight 0.4000kg
Unit Of Measure ea

Be The First To Review This Product!

Help other BroadbandShop users shop smarter by writing reviews for products you have purchased.

Write a product review

More From This Category

VigorAP 710

VigorAP 710


VigorAP 800

VigorAP 800


VigorAP 810

VigorAP 810


VigorAP 900

VigorAP 900


VigorAP 910C

VigorAP 910C